Jaguar XF (X250) 2008-2015 3.0 V6 S/C 335bhp remap figures
Thinking of remapping a Jaguar XF 3.0 V6 S/C 335bhp? The standard car makes 335bhp and 450Nm; with a Stage 1 remap from our Leicester workshop we expect around 365bhp and 486Nm, up to +30bhp and +36Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 335 bhp | 365 bhp | +30 bhp |
| Torque | 450 Nm | 486 Nm | +36 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 335 bhp | 450 Nm | |
| Stage 1Maximum software-only performance | 365 bhp | 486 Nm | +30 bhp +36 Nm |
| Stage 1 EcoPerformance with economy in mind | 358 bhp | 483 Nm | +23 bhp +33 Nm |
| Eco mapEconomy first | 355 bhp | 481 Nm | +20 bhp +31 Nm |
Who is the Stage 1 map for?
- Drivers who want a sharper throttle and a small, honest gain from software alone.
- Owners who would rather keep the car standard in every other way.
- Anyone who wants the fullest software-only map for this engine, accepting that the gain is modest without a turbocharger.
What this means for your XF
Naturally aspirated petrol engines have no boost to raise, so gains from software alone are more modest than on a turbocharged car and come from fuelling, ignition and throttle response.
Engine management is by a Bosch MED17.8.3 unit. We read the ECU on your car and compare it with the software listed here before any work starts, so you know what to expect before you commit.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Jaguar XF 3.0 V6 S/C 335bhp?
We expect 365bhp and 486Nm against 335bhp and 450Nm as standard: up to +30bhp and +36Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Jaguar XF 3.0 V6 S/C 335bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 358bhp and 483Nm expected. The Eco map is economy first: 355bhp and 481Nm. Both still sit above the standard 335bhp and 450Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Jaguar XF figures
Other petrol variants
- 4.2 V8 293bhp 2008-2015
- 5.0 V8 379bhp 2008-2015
- 4.2 V8 410bhp 2008-2015
- 2.0T 236bhp 2008-2015
- 5.0 V8 R 502bhp 2008-2015
All petrol XF (X250) variants · XF (X250) 2008-2015 overview · All Jaguar figures