Iveco Cursor 8 1998-2002 7.8l 296bhp remap figures
The Iveco Cursor 8 7.8l 296bhp (1998-2002) is a diesel 7.8L model making 296bhp and 1110Nm as standard. After a Stage 1 ECU remap we expect 360bhp and 1252Nm - up to 64bhp and 142Nm more than stock.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 296 bhp | 360 bhp | +64 bhp |
| Torque | 1110 Nm | 1252 Nm | +142 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 296 bhp | 1110 Nm | |
| Stage 1Maximum software-only performance | 360 bhp | 1252 Nm | +64 bhp +142 Nm |
| Stage 1 EcoPerformance with economy in mind | 344 bhp | 1241 Nm | +48 bhp +131 Nm |
| Eco mapEconomy first | 339 bhp | 1234 Nm | +43 bhp +124 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your Cursor 8
On a diesel the biggest change is normally torque: the remap changes how much fuel and boost the ECU allows across the rev range, so pulling power arrives earlier and holds on longer.
This car is listed with a Bosch MS6.2 engine control unit. Older engine management is simpler to work with, but age matters: worn sensors, leaks and tired components can hold back what a remap delivers, which is why we run a diagnostic check first.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Iveco Cursor 8 7.8l 296bhp?
We expect 360bhp and 1252Nm against 296bhp and 1110Nm as standard: up to +64bhp and +142Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Iveco Cursor 8 7.8l 296bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 344bhp and 1241Nm expected. The Eco map is economy first: 339bhp and 1234Nm. Both still sit above the standard 296bhp and 1110Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Iveco Cursor 8 figures
Other diesel variants
All diesel Cursor 8 variants · Cursor 8 1998-2002 overview · All Iveco figures