Iveco Cursor 13 1998-2002 12.9l 540bhp remap figures
The Iveco Cursor 13 12.9l 540bhp (1998-2002) is a diesel 12.9L model making 540bhp and 2350Nm as standard. After a Stage 1 ECU remap we expect 605bhp and 2629Nm - up to 65bhp and 279Nm more than stock.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 540 bhp | 605 bhp | +65 bhp |
| Torque | 2350 Nm | 2629 Nm | +279 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 540 bhp | 2350 Nm | |
| Stage 1Maximum software-only performance | 605 bhp | 2629 Nm | +65 bhp +279 Nm |
| Stage 1 EcoPerformance with economy in mind | 589 bhp | 2607 Nm | +49 bhp +257 Nm |
| Eco mapEconomy first | 584 bhp | 2593 Nm | +44 bhp +243 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your Cursor 13
Diesel remaps work mainly on boost pressure, fuel delivery and torque limiters, which is why the Nm gain is usually the figure you feel in everyday driving, particularly when overtaking or towing.
The ECU recorded for this variant is a Bosch MS6.2. Older engine management is simpler to work with, but age matters: worn sensors, leaks and tired components can hold back what a remap delivers, which is why we run a diagnostic check first.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Iveco Cursor 13 12.9l 540bhp?
We expect 605bhp and 2629Nm against 540bhp and 2350Nm as standard: up to +65bhp and +279Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Iveco Cursor 13 12.9l 540bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 589bhp and 2607Nm expected. The Eco map is economy first: 584bhp and 2593Nm. Both still sit above the standard 540bhp and 2350Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Iveco Cursor 13 figures
Other diesel variants
All diesel Cursor 13 variants · Cursor 13 1998-2002 overview · All Iveco figures