Iveco Cursor 10 1998-2002 10.3l 400bhp remap figures
Stock, this 1998-2002 Iveco Cursor 10 diesel (10.3L) produces 400bhp and 1900Nm. Our expected figures for a Stage 1 remap are 465bhp and 2120Nm, an expected gain of up to 65bhp and 220Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 400 bhp | 465 bhp | +65 bhp |
| Torque | 1900 Nm | 2120 Nm | +220 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 400 bhp | 1900 Nm | |
| Stage 1Maximum software-only performance | 465 bhp | 2120 Nm | +65 bhp +220 Nm |
| Stage 1 EcoPerformance with economy in mind | 449 bhp | 2102 Nm | +49 bhp +202 Nm |
| Eco mapEconomy first | 444 bhp | 2091 Nm | +44 bhp +191 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your Cursor 10
Diesel remaps work mainly on boost pressure, fuel delivery and torque limiters, which is why the Nm gain is usually the figure you feel in everyday driving, particularly when overtaking or towing.
Engine management is by a Bosch MS6.2 unit. Older engine management is simpler to work with, but age matters: worn sensors, leaks and tired components can hold back what a remap delivers, which is why we run a diagnostic check first.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Iveco Cursor 10 10.3l 400bhp?
We expect 465bhp and 2120Nm against 400bhp and 1900Nm as standard: up to +65bhp and +220Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Iveco Cursor 10 10.3l 400bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 449bhp and 2102Nm expected. The Eco map is economy first: 444bhp and 2091Nm. Both still sit above the standard 400bhp and 1900Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Iveco Cursor 10 figures
Other diesel variants
All diesel Cursor 10 variants · Cursor 10 1998-2002 overview · All Iveco figures