Ford Transit Custom 2019-2023 2.0 TDCI EU6 130bhp remap figures
Thinking of remapping a Ford Transit Custom 2.0 TDCI EU6 130bhp? The standard car makes 130bhp and 385Nm; with a Stage 1 remap from our Leicester workshop we expect around 225bhp and 492Nm, up to +95bhp and +107Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 130 bhp | 225 bhp | +95 bhp |
| Torque | 385 Nm | 492 Nm | +107 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 130 bhp | 385 Nm | |
| Stage 1Maximum software-only performance | 225 bhp | 492 Nm | +95 bhp +107 Nm |
| Stage 1 EcoPerformance with economy in mind | 201 bhp | 483 Nm | +71 bhp +98 Nm |
| Eco mapEconomy first | 194 bhp | 478 Nm | +64 bhp +93 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your Transit Custom
On a diesel the biggest change is normally torque: the remap changes how much fuel and boost the ECU allows across the rev range, so pulling power arrives earlier and holds on longer.
Engine management is by a Continental SID212 unit. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Ford Transit Custom 2.0 TDCI EU6 130bhp?
We expect 225bhp and 492Nm against 130bhp and 385Nm as standard: up to +95bhp and +107Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Ford Transit Custom 2.0 TDCI EU6 130bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 201bhp and 483Nm expected. The Eco map is economy first: 194bhp and 478Nm. Both still sit above the standard 130bhp and 385Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Ford Transit Custom figures
Other diesel variants
All diesel Transit Custom variants · Transit Custom 2019-2023 overview · All Ford figures