Ford Transit Custom 2016-2019 2.0 TDCI EU6 105bhp remap figures
The Ford Transit Custom 2.0 TDCI EU6 105bhp (2016-2019) is a diesel 2.0L model making 105bhp and 361Nm as standard. After a Stage 1 ECU remap we expect 194bhp and 477Nm - up to 89bhp and 116Nm more than stock.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 105 bhp | 194 bhp | +89 bhp |
| Torque | 361 Nm | 477 Nm | +116 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 105 bhp | 361 Nm | |
| Stage 1Maximum software-only performance | 194 bhp | 477 Nm | +89 bhp +116 Nm |
| Stage 1 EcoPerformance with economy in mind | 172 bhp | 468 Nm | +67 bhp +107 Nm |
| Eco mapEconomy first | 165 bhp | 462 Nm | +60 bhp +101 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your Transit Custom
On a diesel the biggest change is normally torque: the remap changes how much fuel and boost the ECU allows across the rev range, so pulling power arrives earlier and holds on longer.
Engine management is by a Continental SID211 unit. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Ford Transit Custom 2.0 TDCI EU6 105bhp?
We expect 194bhp and 477Nm against 105bhp and 361Nm as standard: up to +89bhp and +116Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Ford Transit Custom 2.0 TDCI EU6 105bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 172bhp and 468Nm expected. The Eco map is economy first: 165bhp and 462Nm. Both still sit above the standard 105bhp and 361Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Ford Transit Custom figures
Other diesel variants
- 2.2 TDCI EU5 125bhp 2012-2016
- 2.0 TDCI EU6 130bhp 2016-2019
- 2.2 TDCI EU5 155bhp 2012-2016
- 2.0 TDCI EU6 170bhp 2016-2019
All diesel Transit Custom variants · Transit Custom 2012-2019 overview · All Ford figures