Ford S Max 2015> 2.0 TDCi 118bhp remap figures
Thinking of remapping a Ford S Max 2.0 TDCi 118bhp? The standard car makes 118bhp and 311Nm; with a Stage 1 remap from our Leicester workshop we expect around 165bhp and 385Nm, up to +47bhp and +74Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 118 bhp | 165 bhp | +47 bhp |
| Torque | 311 Nm | 385 Nm | +74 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 118 bhp | 311 Nm | |
| Stage 1Maximum software-only performance | 165 bhp | 385 Nm | +47 bhp +74 Nm |
| Stage 1 EcoPerformance with economy in mind | 153 bhp | 379 Nm | +35 bhp +68 Nm |
| Eco mapEconomy first | 149 bhp | 375 Nm | +31 bhp +64 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your S Max
On a diesel the biggest change is normally torque: the remap changes how much fuel and boost the ECU allows across the rev range, so pulling power arrives earlier and holds on longer.
The ECU recorded for this variant is a Delphi DCM6.1. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Ford S Max 2.0 TDCi 118bhp?
We expect 165bhp and 385Nm against 118bhp and 311Nm as standard: up to +47bhp and +74Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Ford S Max 2.0 TDCi 118bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 153bhp and 379Nm expected. The Eco map is economy first: 149bhp and 375Nm. Both still sit above the standard 118bhp and 311Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Ford S Max figures
Other diesel variants
All diesel S Max variants · S Max 2015> overview · All Ford figures