Ford S Max 2010-2014 2.2 TDCi 172bhp remap figures
Stock, this 2010-2014 Ford S Max diesel (2.2L) produces 172bhp and 400Nm. Our expected figures for a Stage 1 remap are 227bhp and 469Nm, an expected gain of up to 55bhp and 69Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 172 bhp | 227 bhp | +55 bhp |
| Torque | 400 Nm | 469 Nm | +69 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 172 bhp | 400 Nm | |
| Stage 1Maximum software-only performance | 227 bhp | 469 Nm | +55 bhp +69 Nm |
| Stage 1 EcoPerformance with economy in mind | 213 bhp | 463 Nm | +41 bhp +63 Nm |
| Eco mapEconomy first | 209 bhp | 460 Nm | +37 bhp +60 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your S Max
On a diesel the biggest change is normally torque: the remap changes how much fuel and boost the ECU allows across the rev range, so pulling power arrives earlier and holds on longer.
Engine management is by a Bosch EDC16CP39 unit. We read the ECU on your car and compare it with the software listed here before any work starts, so you know what to expect before you commit.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Ford S Max 2.2 TDCi 172bhp?
We expect 227bhp and 469Nm against 172bhp and 400Nm as standard: up to +55bhp and +69Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Ford S Max 2.2 TDCi 172bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 213bhp and 463Nm expected. The Eco map is economy first: 209bhp and 460Nm. Both still sit above the standard 172bhp and 400Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Ford S Max figures
Other diesel variants
- 2.0 TDCi 160bhp 2010-2014
- 2.2 TDCi 197bhp 2010-2014
- 2.0 TDCi 138bhp 2010-2014
- 1.6 TDCi 113bhp 2010-2014
- 2.0 TDCi 113bhp 2010-2014
All diesel S Max variants · S Max 2010-2014 overview · All Ford figures