Ford Ranger 2012> 3.2 TDCi 197bhp remap figures
Thinking of remapping a Ford Ranger 3.2 TDCi 197bhp? The standard car makes 197bhp and 471Nm; with a Stage 1 remap from our Leicester workshop we expect around 240bhp and 547Nm, up to +43bhp and +76Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 197 bhp | 240 bhp | +43 bhp |
| Torque | 471 Nm | 547 Nm | +76 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 197 bhp | 471 Nm | |
| Stage 1Maximum software-only performance | 240 bhp | 547 Nm | +43 bhp +76 Nm |
| Stage 1 EcoPerformance with economy in mind | 229 bhp | 541 Nm | +32 bhp +70 Nm |
| Eco mapEconomy first | 226 bhp | 537 Nm | +29 bhp +66 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your Ranger
Diesel remaps work mainly on boost pressure, fuel delivery and torque limiters, which is why the Nm gain is usually the figure you feel in everyday driving, particularly when overtaking or towing.
The ECU recorded for this variant is a Siemens SID208. We read the ECU on your car and compare it with the software listed here before any work starts, so you know what to expect before you commit.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Ford Ranger 3.2 TDCi 197bhp?
We expect 240bhp and 547Nm against 197bhp and 471Nm as standard: up to +43bhp and +76Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Ford Ranger 3.2 TDCi 197bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 229bhp and 541Nm expected. The Eco map is economy first: 226bhp and 537Nm. Both still sit above the standard 197bhp and 471Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Ford Ranger figures
Other diesel variants
All diesel Ranger variants · Ranger 2012> overview · All Ford figures