Ford Grand C Max 2010> 2.0 TDCi 160bhp remap figures
Thinking of remapping a Ford Grand C Max 2.0 TDCi 160bhp? The standard car makes 160bhp and 340Nm; with a Stage 1 remap from our Leicester workshop we expect around 206bhp and 425Nm, up to +46bhp and +85Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 160 bhp | 206 bhp | +46 bhp |
| Torque | 340 Nm | 425 Nm | +85 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 160 bhp | 340 Nm | |
| Stage 1Maximum software-only performance | 206 bhp | 425 Nm | +46 bhp +85 Nm |
| Stage 1 EcoPerformance with economy in mind | 195 bhp | 418 Nm | +35 bhp +78 Nm |
| Eco mapEconomy first | 191 bhp | 414 Nm | +31 bhp +74 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your Grand C Max
On a diesel the biggest change is normally torque: the remap changes how much fuel and boost the ECU allows across the rev range, so pulling power arrives earlier and holds on longer.
The ECU recorded for this variant is a Delphi DCM3.5. We read the ECU on your car and compare it with the software listed here before any work starts, so you know what to expect before you commit.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Ford Grand C Max 2.0 TDCi 160bhp?
We expect 206bhp and 425Nm against 160bhp and 340Nm as standard: up to +46bhp and +85Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Ford Grand C Max 2.0 TDCi 160bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 195bhp and 418Nm expected. The Eco map is economy first: 191bhp and 414Nm. Both still sit above the standard 160bhp and 340Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Ford Grand C Max figures
Other diesel variants
All diesel Grand C Max variants · Grand C Max 2010> overview · All Ford figures