Ford Focus 2005-2010 1.6 TDCi 88bhp remap figures
Stock, this 2005-2010 Ford Focus diesel (1.6L) produces 88bhp and 216Nm. Our expected figures for a Stage 1 remap are 124bhp and 290Nm, an expected gain of up to 36bhp and 74Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 88 bhp | 124 bhp | +36 bhp |
| Torque | 216 Nm | 290 Nm | +74 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 88 bhp | 216 Nm | |
| Stage 1Maximum software-only performance | 124 bhp | 290 Nm | +36 bhp +74 Nm |
| Stage 1 EcoPerformance with economy in mind | 115 bhp | 284 Nm | +27 bhp +68 Nm |
| Eco mapEconomy first | 112 bhp | 280 Nm | +24 bhp +64 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your Focus
Diesel remaps work mainly on boost pressure, fuel delivery and torque limiters, which is why the Nm gain is usually the figure you feel in everyday driving, particularly when overtaking or towing.
This car is listed with a Bosch EDC16C3/C34 engine control unit. Older engine management is simpler to work with, but age matters: worn sensors, leaks and tired components can hold back what a remap delivers, which is why we run a diagnostic check first.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Ford Focus 1.6 TDCi 88bhp?
We expect 124bhp and 290Nm against 88bhp and 216Nm as standard: up to +36bhp and +74Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Ford Focus 1.6 TDCi 88bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 115bhp and 284Nm expected. The Eco map is economy first: 112bhp and 280Nm. Both still sit above the standard 88bhp and 216Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.