Ford Fiesta 2002-2008 1.4 TDCi 67bhp remap figures
Thinking of remapping a Ford Fiesta 1.4 TDCi 67bhp? The standard car makes 67bhp and 160Nm; with a Stage 1 remap from our Leicester workshop we expect around 102bhp and 215Nm, up to +35bhp and +55Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 67 bhp | 102 bhp | +35 bhp |
| Torque | 160 Nm | 215 Nm | +55 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 67 bhp | 160 Nm | |
| Stage 1Maximum software-only performance | 102 bhp | 215 Nm | +35 bhp +55 Nm |
| Stage 1 EcoPerformance with economy in mind | 93 bhp | 211 Nm | +26 bhp +51 Nm |
| Eco mapEconomy first | 90 bhp | 208 Nm | +23 bhp +48 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your Fiesta
On a diesel the biggest change is normally torque: the remap changes how much fuel and boost the ECU allows across the rev range, so pulling power arrives earlier and holds on longer.
Engine management is by a Siemens SID802/804 unit. Older engine management is simpler to work with, but age matters: worn sensors, leaks and tired components can hold back what a remap delivers, which is why we run a diagnostic check first.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Ford Fiesta 1.4 TDCi 67bhp?
We expect 102bhp and 215Nm against 67bhp and 160Nm as standard: up to +35bhp and +55Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Ford Fiesta 1.4 TDCi 67bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 93bhp and 211Nm expected. The Eco map is economy first: 90bhp and 208Nm. Both still sit above the standard 67bhp and 160Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Ford Fiesta figures
Other diesel variants
All diesel Fiesta variants · Fiesta 2002-2008 overview · All Ford figures