Ford Equator 2021> 2.0 EcoBoost 225bhp remap figures
The Ford Equator 2.0 EcoBoost 225bhp (2021>) is a petrol 2.0L model making 225bhp and 361Nm as standard. After a Stage 1 ECU remap we expect 265bhp and 432Nm - up to 40bhp and 71Nm more than stock.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 225 bhp | 265 bhp | +40 bhp |
| Torque | 361 Nm | 432 Nm | +71 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 225 bhp | 361 Nm | |
| Stage 1Maximum software-only performance | 265 bhp | 432 Nm | +40 bhp +71 Nm |
| Stage 1 EcoPerformance with economy in mind | 255 bhp | 426 Nm | +30 bhp +65 Nm |
| Eco mapEconomy first | 252 bhp | 423 Nm | +27 bhp +62 Nm |
Who is the Stage 1 map for?
- Drivers who want a noticeably quicker car from a software-only change, with no new parts.
- Daily drivers who want stronger mid-range pull and a sharper throttle.
- Anyone who wants the biggest gain we list without fitting hardware.
What this means for your Equator
Turbocharged petrol engines respond well to calibration changes: boost and timing are the main levers, and the result is a flatter, stronger torque curve as well as a higher peak.
This car is listed with a Bosch MG1CS017 engine control unit. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Ford Equator 2.0 EcoBoost 225bhp?
We expect 265bhp and 432Nm against 225bhp and 361Nm as standard: up to +40bhp and +71Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Ford Equator 2.0 EcoBoost 225bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 255bhp and 426Nm expected. The Eco map is economy first: 252bhp and 423Nm. Both still sit above the standard 225bhp and 361Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Ford Equator figures
Other petrol variants
All petrol Equator variants · Equator 2021> overview · All Ford figures