Ford Edge 2019> 2.0 EcoBoost 250bhp remap figures
The Ford Edge 2.0 EcoBoost 250bhp (2019>) is a petrol 2.0L model making 250bhp and 376Nm as standard. After a Stage 1 ECU remap we expect 290bhp and 446Nm - up to 40bhp and 70Nm more than stock.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 250 bhp | 290 bhp | +40 bhp |
| Torque | 376 Nm | 446 Nm | +70 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 250 bhp | 376 Nm | |
| Stage 1Maximum software-only performance | 290 bhp | 446 Nm | +40 bhp +70 Nm |
| Stage 1 EcoPerformance with economy in mind | 280 bhp | 440 Nm | +30 bhp +64 Nm |
| Eco mapEconomy first | 277 bhp | 437 Nm | +27 bhp +61 Nm |
Who is the Stage 1 map for?
- Drivers who want a noticeably quicker car from a software-only change, with no new parts.
- Daily drivers who want stronger mid-range pull and a sharper throttle.
- Anyone who wants the biggest gain we list without fitting hardware.
What this means for your Edge
Turbocharged petrol engines respond well to calibration changes: boost and timing are the main levers, and the result is a flatter, stronger torque curve as well as a higher peak.
This car is listed with a Bosch MG1CS017 engine control unit. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Ford Edge 2.0 EcoBoost 250bhp?
We expect 290bhp and 446Nm against 250bhp and 376Nm as standard: up to +40bhp and +70Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Ford Edge 2.0 EcoBoost 250bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 280bhp and 440Nm expected. The Eco map is economy first: 277bhp and 437Nm. Both still sit above the standard 250bhp and 376Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Ford Edge figures
Other petrol variants
All petrol Edge variants · Edge 2015> overview · All Ford figures