Ford C-Max 2015> 2.0 TDCi 170bhp remap figures
The Ford C-Max 2.0 TDCi 170bhp (2015>) is a diesel 2.0L model making 170bhp and 370Nm as standard. After a Stage 1 ECU remap we expect 216bhp and 497Nm - up to 46bhp and 127Nm more than stock.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 170 bhp | 216 bhp | +46 bhp |
| Torque | 370 Nm | 497 Nm | +127 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 170 bhp | 370 Nm | |
| Stage 1Maximum software-only performance | 216 bhp | 497 Nm | +46 bhp +127 Nm |
| Stage 1 EcoPerformance with economy in mind | 205 bhp | 487 Nm | +35 bhp +117 Nm |
| Eco mapEconomy first | 201 bhp | 480 Nm | +31 bhp +110 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your C-Max
On a diesel the biggest change is normally torque: the remap changes how much fuel and boost the ECU allows across the rev range, so pulling power arrives earlier and holds on longer.
Engine management is by a Delphi DCM6.1 unit. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Ford C-Max 2.0 TDCi 170bhp?
We expect 216bhp and 497Nm against 170bhp and 370Nm as standard: up to +46bhp and +127Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Ford C-Max 2.0 TDCi 170bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 205bhp and 487Nm expected. The Eco map is economy first: 201bhp and 480Nm. Both still sit above the standard 170bhp and 370Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Ford C-Max figures
Other diesel variants
All diesel C-Max variants · C-Max 2015> overview · All Ford figures