Fiat Panda (MK3) 2012> 1.2 68bhp remap figures
Stock, this 2012> Fiat Panda petrol (1.2L) produces 68bhp and 102Nm. Our expected figures for a Stage 1 remap are 80bhp and 118Nm, an expected gain of up to 12bhp and 16Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 68 bhp | 80 bhp | +12 bhp |
| Torque | 102 Nm | 118 Nm | +16 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 68 bhp | 102 Nm | |
| Stage 1Maximum software-only performance | 80 bhp | 118 Nm | +12 bhp +16 Nm |
| Stage 1 EcoPerformance with economy in mind | 77 bhp | 117 Nm | +9 bhp +15 Nm |
| Eco mapEconomy first | 76 bhp | 116 Nm | +8 bhp +14 Nm |
Who is the Stage 1 map for?
- Drivers who want a sharper throttle and a small, honest gain from software alone.
- Owners who would rather keep the car standard in every other way.
- Anyone who wants the fullest software-only map for this engine, accepting that the gain is modest without a turbocharger.
What this means for your Panda
Naturally aspirated petrol engines have no boost to raise, so gains from software alone are more modest than on a turbocharged car and come from fuelling, ignition and throttle response.
Engine management is by a Marelli IAW 9GF unit. We read the ECU on your car and compare it with the software listed here before any work starts, so you know what to expect before you commit.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Fiat Panda 1.2 68bhp?
We expect 80bhp and 118Nm against 68bhp and 102Nm as standard: up to +12bhp and +16Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Fiat Panda 1.2 68bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 77bhp and 117Nm expected. The Eco map is economy first: 76bhp and 116Nm. Both still sit above the standard 68bhp and 102Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Fiat Panda figures
Other petrol variants
All petrol Panda (MK3) variants · Panda (MK3) 2012> overview · All Fiat figures