Fiat Ducato 2019> 2.3 Multijet 150bhp remap figures
The Fiat Ducato 2.3 Multijet 150bhp (2019>) is a diesel 2.3L model making 150bhp and 380Nm as standard. After a Stage 1 ECU remap we expect 210bhp and 473Nm - up to 60bhp and 93Nm more than stock.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 150 bhp | 210 bhp | +60 bhp |
| Torque | 380 Nm | 473 Nm | +93 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 150 bhp | 380 Nm | |
| Stage 1Maximum software-only performance | 210 bhp | 473 Nm | +60 bhp +93 Nm |
| Stage 1 EcoPerformance with economy in mind | 195 bhp | 466 Nm | +45 bhp +86 Nm |
| Eco mapEconomy first | 190 bhp | 461 Nm | +40 bhp +81 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your Ducato
On a diesel the biggest change is normally torque: the remap changes how much fuel and boost the ECU allows across the rev range, so pulling power arrives earlier and holds on longer.
The ECU recorded for this variant is a Marelli MJD9. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Fiat Ducato 2.3 Multijet 150bhp?
We expect 210bhp and 473Nm against 150bhp and 380Nm as standard: up to +60bhp and +93Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Fiat Ducato 2.3 Multijet 150bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 195bhp and 466Nm expected. The Eco map is economy first: 190bhp and 461Nm. Both still sit above the standard 150bhp and 380Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.