Fiat Coupe 1995-2000 2.0 20V Turbo 220bhp remap figures
Stock, this 1995-2000 Fiat Coupe petrol (2.0L) produces 220bhp and 311Nm. Our expected figures for a Stage 1 remap are 265bhp and 356Nm, an expected gain of up to 45bhp and 45Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 220 bhp | 265 bhp | +45 bhp |
| Torque | 311 Nm | 356 Nm | +45 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 220 bhp | 311 Nm | |
| Stage 1Maximum software-only performance | 265 bhp | 356 Nm | +45 bhp +45 Nm |
| Stage 1 EcoPerformance with economy in mind | 254 bhp | 352 Nm | +34 bhp +41 Nm |
| Eco mapEconomy first | 250 bhp | 350 Nm | +30 bhp +39 Nm |
Who is the Stage 1 map for?
- Drivers who want a noticeably quicker car from a software-only change, with no new parts.
- Daily drivers who want stronger mid-range pull and a sharper throttle.
- Anyone who wants the biggest gain we list without fitting hardware.
What this means for your Coupe
Turbocharged petrol engines respond well to calibration changes: boost and timing are the main levers, and the result is a flatter, stronger torque curve as well as a higher peak.
The ECU recorded for this variant is a Bosch M2.1. Older engine management is simpler to work with, but age matters: worn sensors, leaks and tired components can hold back what a remap delivers, which is why we run a diagnostic check first.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Fiat Coupe 2.0 20V Turbo 220bhp?
We expect 265bhp and 356Nm against 220bhp and 311Nm as standard: up to +45bhp and +45Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Fiat Coupe 2.0 20V Turbo 220bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 254bhp and 352Nm expected. The Eco map is economy first: 250bhp and 350Nm. Both still sit above the standard 220bhp and 311Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Fiat Coupe figures
Other petrol variants
All petrol Coupe variants · Coupe 1995-2000 overview · All Fiat figures