Ferrari GTC4Lusso 2018> 3.9 V8 Twin Turbo 601bhp remap figures
Thinking of remapping a Ferrari GTC4Lusso 3.9 V8 Twin Turbo 601bhp? The standard car makes 601bhp and 759Nm; with a Stage 1 remap from our Leicester workshop we expect around 725bhp and 954Nm, up to +124bhp and +195Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 601 bhp | 725 bhp | +124 bhp |
| Torque | 759 Nm | 954 Nm | +195 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 601 bhp | 759 Nm | |
| Stage 1Maximum software-only performance | 725 bhp | 954 Nm | +124 bhp +195 Nm |
| Stage 1 EcoPerformance with economy in mind | 694 bhp | 938 Nm | +93 bhp +179 Nm |
| Eco mapEconomy first | 684 bhp | 929 Nm | +83 bhp +170 Nm |
Who is the Stage 1 map for?
- Drivers who want a noticeably quicker car from a software-only change, with no new parts.
- Daily drivers who want stronger mid-range pull and a sharper throttle.
- Anyone who wants the biggest gain we list without fitting hardware.
What this means for your GTC4Lusso
On a turbocharged petrol engine a remap adjusts boost, ignition timing and fuelling together, so both power and mid-range torque rise and the car pulls harder out of corners and junctions.
Engine management is by a Bosch MED17.3.5 unit. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Ferrari GTC4Lusso 3.9 V8 Twin Turbo 601bhp?
We expect 725bhp and 954Nm against 601bhp and 759Nm as standard: up to +124bhp and +195Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Ferrari GTC4Lusso 3.9 V8 Twin Turbo 601bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 694bhp and 938Nm expected. The Eco map is economy first: 684bhp and 929Nm. Both still sit above the standard 601bhp and 759Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Ferrari GTC4Lusso figures
Other petrol variants
All petrol GTC4Lusso variants · GTC4Lusso 2016> overview · All Ferrari figures