Ferrari California 2008> 4.3 V8 480bhp remap figures
Thinking of remapping a Ferrari California 4.3 V8 480bhp? The standard car makes 480bhp and 500Nm; with a Stage 1 remap from our Leicester workshop we expect around 510bhp and 534Nm, up to +30bhp and +34Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 480 bhp | 510 bhp | +30 bhp |
| Torque | 500 Nm | 534 Nm | +34 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 480 bhp | 500 Nm | |
| Stage 1Maximum software-only performance | 510 bhp | 534 Nm | +30 bhp +34 Nm |
| Stage 1 EcoPerformance with economy in mind | 503 bhp | 531 Nm | +23 bhp +31 Nm |
| Eco mapEconomy first | 500 bhp | 530 Nm | +20 bhp +30 Nm |
Who is the Stage 1 map for?
- Drivers who want a sharper throttle and a small, honest gain from software alone.
- Owners who would rather keep the car standard in every other way.
- Anyone who wants the fullest software-only map for this engine, accepting that the gain is modest without a turbocharger.
What this means for your California
Naturally aspirated petrol engines have no boost to raise, so gains from software alone are more modest than on a turbocharged car and come from fuelling, ignition and throttle response.
This car is listed with a Bosch MED9.6.1 engine control unit. We read the ECU on your car and compare it with the software listed here before any work starts, so you know what to expect before you commit.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Ferrari California 4.3 V8 480bhp?
We expect 510bhp and 534Nm against 480bhp and 500Nm as standard: up to +30bhp and +34Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Ferrari California 4.3 V8 480bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 503bhp and 531Nm expected. The Eco map is economy first: 500bhp and 530Nm. Both still sit above the standard 480bhp and 500Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Ferrari California figures
Other petrol variants
All petrol California variants · California 2008> overview · All Ferrari figures