Ferrari 360 1999-2005 3.6 V8 400bhp remap figures
Stock, this 1999-2005 Ferrari 360 petrol (3.6L) produces 400bhp and 373Nm. Our expected figures for a Stage 1 remap are 430bhp and 406Nm, an expected gain of up to 30bhp and 33Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 400 bhp | 430 bhp | +30 bhp |
| Torque | 373 Nm | 406 Nm | +33 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 400 bhp | 373 Nm | |
| Stage 1Maximum software-only performance | 430 bhp | 406 Nm | +30 bhp +33 Nm |
| Stage 1 EcoPerformance with economy in mind | 423 bhp | 403 Nm | +23 bhp +30 Nm |
| Eco mapEconomy first | 420 bhp | 402 Nm | +20 bhp +29 Nm |
Who is the Stage 1 map for?
- Drivers who want a sharper throttle and a small, honest gain from software alone.
- Owners who would rather keep the car standard in every other way.
- Anyone who wants the fullest software-only map for this engine, accepting that the gain is modest without a turbocharger.
What this means for your 360
Without a turbocharger the improvement comes from ignition, fuelling and throttle mapping rather than boost, so expect a smaller but still noticeable change in response.
The ECU recorded for this variant is a Bosch ME7.3.1. Older engine management is simpler to work with, but age matters: worn sensors, leaks and tired components can hold back what a remap delivers, which is why we run a diagnostic check first.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Ferrari 360 3.6 V8 400bhp?
We expect 430bhp and 406Nm against 400bhp and 373Nm as standard: up to +30bhp and +33Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Ferrari 360 3.6 V8 400bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 423bhp and 403Nm expected. The Eco map is economy first: 420bhp and 402Nm. Both still sit above the standard 400bhp and 373Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Ferrari 360 figures
Other petrol variants
All petrol 360 variants · 360 1999-2005 overview · All Ferrari figures