DS 3 Crossback 2019> 1.2 PureTech 99bhp remap figures
The DS 3 Crossback 1.2 PureTech 99bhp (2019>) is a petrol 1.2L model making 99bhp and 205Nm as standard. After a Stage 1 ECU remap we expect 140bhp and 249Nm - up to 41bhp and 44Nm more than stock.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 99 bhp | 140 bhp | +41 bhp |
| Torque | 205 Nm | 249 Nm | +44 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 99 bhp | 205 Nm | |
| Stage 1Maximum software-only performance | 140 bhp | 249 Nm | +41 bhp +44 Nm |
| Stage 1 EcoPerformance with economy in mind | 130 bhp | 245 Nm | +31 bhp +40 Nm |
| Eco mapEconomy first | 126 bhp | 243 Nm | +27 bhp +38 Nm |
Who is the Stage 1 map for?
- Drivers who want a sharper throttle and a small, honest gain from software alone.
- Owners who would rather keep the car standard in every other way.
- Anyone who wants the fullest software-only map for this engine, accepting that the gain is modest without a turbocharger.
What this means for your 3 Crossback
Without a turbocharger the improvement comes from ignition, fuelling and throttle mapping rather than boost, so expect a smaller but still noticeable change in response.
The ECU recorded for this variant is a Valeo VD56. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the DS 3 Crossback 1.2 PureTech 99bhp?
We expect 140bhp and 249Nm against 99bhp and 205Nm as standard: up to +41bhp and +44Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the DS 3 Crossback 1.2 PureTech 99bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 130bhp and 245Nm expected. The Eco map is economy first: 126bhp and 243Nm. Both still sit above the standard 99bhp and 205Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More DS 3 Crossback figures
Other petrol variants
All petrol 3 Crossback variants · 3 Crossback 2019> overview · All DS figures