Dodge Ram (DS DJ) 2020> 3.0 EcoDiesel 260bhp remap figures
The Dodge Ram 3.0 EcoDiesel 260bhp (2020>) is a diesel 3.0L model making 260bhp and 651Nm as standard. After a Stage 1 ECU remap we expect 315bhp and 724Nm - up to 55bhp and 73Nm more than stock.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 260 bhp | 315 bhp | +55 bhp |
| Torque | 651 Nm | 724 Nm | +73 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 260 bhp | 651 Nm | |
| Stage 1Maximum software-only performance | 315 bhp | 724 Nm | +55 bhp +73 Nm |
| Stage 1 EcoPerformance with economy in mind | 301 bhp | 718 Nm | +41 bhp +67 Nm |
| Eco mapEconomy first | 297 bhp | 715 Nm | +37 bhp +64 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your Ram
On a diesel the biggest change is normally torque: the remap changes how much fuel and boost the ECU allows across the rev range, so pulling power arrives earlier and holds on longer.
Engine management is by a Bosch EDC17C69 unit. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Dodge Ram 3.0 EcoDiesel 260bhp?
We expect 315bhp and 724Nm against 260bhp and 651Nm as standard: up to +55bhp and +73Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Dodge Ram 3.0 EcoDiesel 260bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 301bhp and 718Nm expected. The Eco map is economy first: 297bhp and 715Nm. Both still sit above the standard 260bhp and 651Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Dodge Ram figures
Other diesel variants
All diesel Ram (DS DJ) variants · Ram (DS DJ) 2009> overview · All Dodge figures