DAF LF45 2006> 6.7 ltr GR210 286bhp remap figures
Thinking of remapping a DAF LF45 6.7 ltr GR210 286bhp? The standard car makes 286bhp and 1020Nm; with a Stage 1 remap from our Leicester workshop we expect around 330bhp and 1144Nm, up to +44bhp and +124Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 286 bhp | 330 bhp | +44 bhp |
| Torque | 1020 Nm | 1144 Nm | +124 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 286 bhp | 1020 Nm | |
| Stage 1Maximum software-only performance | 330 bhp | 1144 Nm | +44 bhp +124 Nm |
| Stage 1 EcoPerformance with economy in mind | 319 bhp | 1134 Nm | +33 bhp +114 Nm |
| Eco mapEconomy first | 315 bhp | 1128 Nm | +29 bhp +108 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your LF45
On a diesel the biggest change is normally torque: the remap changes how much fuel and boost the ECU allows across the rev range, so pulling power arrives earlier and holds on longer.
Engine management is by a Bosch ECSDC3/EDC7 unit. We read the ECU on your car and compare it with the software listed here before any work starts, so you know what to expect before you commit.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the DAF LF45 6.7 ltr GR210 286bhp?
We expect 330bhp and 1144Nm against 286bhp and 1020Nm as standard: up to +44bhp and +124Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the DAF LF45 6.7 ltr GR210 286bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 319bhp and 1134Nm expected. The Eco map is economy first: 315bhp and 1128Nm. Both still sit above the standard 286bhp and 1020Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.