DAF CF85 2002-2005 12.9 ltr XE355 480bhp remap figures
Thinking of remapping a DAF CF85 12.9 ltr XE355 480bhp? The standard car makes 480bhp and 2100Nm; with a Stage 1 remap from our Leicester workshop we expect around 545bhp and 2378Nm, up to +65bhp and +278Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 480 bhp | 545 bhp | +65 bhp |
| Torque | 2100 Nm | 2378 Nm | +278 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 480 bhp | 2100 Nm | |
| Stage 1Maximum software-only performance | 545 bhp | 2378 Nm | +65 bhp +278 Nm |
| Stage 1 EcoPerformance with economy in mind | 529 bhp | 2356 Nm | +49 bhp +256 Nm |
| Eco mapEconomy first | 524 bhp | 2342 Nm | +44 bhp +242 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your CF85
On a diesel the biggest change is normally torque: the remap changes how much fuel and boost the ECU allows across the rev range, so pulling power arrives earlier and holds on longer.
Engine management is by a Bosch MS6.2 unit. Older engine management is simpler to work with, but age matters: worn sensors, leaks and tired components can hold back what a remap delivers, which is why we run a diagnostic check first.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the DAF CF85 12.9 ltr XE355 480bhp?
We expect 545bhp and 2378Nm against 480bhp and 2100Nm as standard: up to +65bhp and +278Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the DAF CF85 12.9 ltr XE355 480bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 529bhp and 2356Nm expected. The Eco map is economy first: 524bhp and 2342Nm. Both still sit above the standard 480bhp and 2100Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More DAF CF85 figures
Other diesel variants
- 12.9 ltr MX340 460bhp 2006>
- 12.9 ltr MX375 510bhp 2006>
- 12.9 ltr XE315 428bhp 2001-2005
- 12.9 ltr MX300 410bhp 2006>
- 12.9 ltr XE280 381bhp 2001-2005
- 12.9 ltr MX265 360bhp 2006>
- 12.9 ltr 3XE250 340bhp 2001-2005
All diesel CF85 variants · CF85 2001> overview · All DAF figures