Dacia Sandero 2020> 0.9 TCE 88bhp remap figures
Stock, this 2020> Dacia Sandero petrol (0.9L) produces 88bhp and 136Nm. Our expected figures for a Stage 1 remap are 117bhp and 168Nm, an expected gain of up to 29bhp and 32Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 88 bhp | 117 bhp | +29 bhp |
| Torque | 136 Nm | 168 Nm | +32 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 88 bhp | 136 Nm | |
| Stage 1Maximum software-only performance | 117 bhp | 168 Nm | +29 bhp +32 Nm |
| Stage 1 EcoPerformance with economy in mind | 110 bhp | 165 Nm | +22 bhp +29 Nm |
| Eco mapEconomy first | 107 bhp | 164 Nm | +19 bhp +28 Nm |
Who is the Stage 1 map for?
- Drivers who want a noticeably quicker car from a software-only change, with no new parts.
- Daily drivers who want stronger mid-range pull and a sharper throttle.
- Anyone who wants the biggest gain we list without fitting hardware.
What this means for your Sandero
Turbocharged petrol engines respond well to calibration changes: boost and timing are the main levers, and the result is a flatter, stronger torque curve as well as a higher peak.
This car is listed with a Valeo V50 engine control unit. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Dacia Sandero 0.9 TCE 88bhp?
We expect 117bhp and 168Nm against 88bhp and 136Nm as standard: up to +29bhp and +32Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Dacia Sandero 0.9 TCE 88bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 110bhp and 165Nm expected. The Eco map is economy first: 107bhp and 164Nm. Both still sit above the standard 88bhp and 136Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Dacia Sandero figures
Other petrol variants
All petrol Sandero variants · Sandero 2020> overview · All Dacia figures