Dacia Dokker 2017> 1.5 DCi 90bhp remap figures
Thinking of remapping a Dacia Dokker 1.5 DCi 90bhp? The standard car makes 90bhp and 220Nm; with a Stage 1 remap from our Leicester workshop we expect around 140bhp and 303Nm, up to +50bhp and +83Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 90 bhp | 140 bhp | +50 bhp |
| Torque | 220 Nm | 303 Nm | +83 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 90 bhp | 220 Nm | |
| Stage 1Maximum software-only performance | 140 bhp | 303 Nm | +50 bhp +83 Nm |
| Stage 1 EcoPerformance with economy in mind | 128 bhp | 296 Nm | +38 bhp +76 Nm |
| Eco mapEconomy first | 124 bhp | 292 Nm | +34 bhp +72 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your Dokker
On a diesel the biggest change is normally torque: the remap changes how much fuel and boost the ECU allows across the rev range, so pulling power arrives earlier and holds on longer.
Engine management is by a Bosch EDC17C84 unit. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Dacia Dokker 1.5 DCi 90bhp?
We expect 140bhp and 303Nm against 90bhp and 220Nm as standard: up to +50bhp and +83Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Dacia Dokker 1.5 DCi 90bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 128bhp and 296Nm expected. The Eco map is economy first: 124bhp and 292Nm. Both still sit above the standard 90bhp and 220Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Dacia Dokker figures
Other diesel variants
All diesel Dokker variants · Dokker 2017> overview · All Dacia figures