Cupra Formentor 2020> 1.5 TSi 147bhp remap figures
Thinking of remapping a Cupra Formentor 1.5 TSi 147bhp? The standard car makes 147bhp and 250Nm; with a Stage 1 remap from our Leicester workshop we expect around 185bhp and 309Nm, up to +38bhp and +59Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 147 bhp | 185 bhp | +38 bhp |
| Torque | 250 Nm | 309 Nm | +59 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 147 bhp | 250 Nm | |
| Stage 1Maximum software-only performance | 185 bhp | 309 Nm | +38 bhp +59 Nm |
| Stage 1 EcoPerformance with economy in mind | 176 bhp | 304 Nm | +29 bhp +54 Nm |
| Eco mapEconomy first | 172 bhp | 301 Nm | +25 bhp +51 Nm |
Who is the Stage 1 map for?
- Drivers who want a noticeably quicker car from a software-only change, with no new parts.
- Daily drivers who want stronger mid-range pull and a sharper throttle.
- Anyone who wants the biggest gain we list without fitting hardware.
What this means for your Formentor
Turbocharged petrol engines respond well to calibration changes: boost and timing are the main levers, and the result is a flatter, stronger torque curve as well as a higher peak.
This car is listed with a Bosch MG1CS011 engine control unit. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Cupra Formentor 1.5 TSi 147bhp?
We expect 185bhp and 309Nm against 147bhp and 250Nm as standard: up to +38bhp and +59Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Cupra Formentor 1.5 TSi 147bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 176bhp and 304Nm expected. The Eco map is economy first: 172bhp and 301Nm. Both still sit above the standard 147bhp and 250Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Cupra Formentor figures
Other petrol variants
All petrol Formentor variants · Formentor 2020> overview · All Cupra figures