Citroen C3 (GEN 3) 2016> 1.2 PureTech 67bhp remap figures
Thinking of remapping a Citroen C3 1.2 PureTech 67bhp? The standard car makes 67bhp and 106Nm; with a Stage 1 remap from our Leicester workshop we expect around 77bhp and 118Nm, up to +10bhp and +12Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 67 bhp | 77 bhp | +10 bhp |
| Torque | 106 Nm | 118 Nm | +12 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 67 bhp | 106 Nm | |
| Stage 1Maximum software-only performance | 77 bhp | 118 Nm | +10 bhp +12 Nm |
| Stage 1 EcoPerformance with economy in mind | 75 bhp | 117 Nm | +8 bhp +11 Nm |
| Eco mapEconomy first | 74 bhp | 116 Nm | +7 bhp +10 Nm |
Who is the Stage 1 map for?
- Drivers who want a sharper throttle and a small, honest gain from software alone.
- Owners who would rather keep the car standard in every other way.
- Anyone who wants the fullest software-only map for this engine, accepting that the gain is modest without a turbocharger.
What this means for your C3
Without a turbocharger the improvement comes from ignition, fuelling and throttle mapping rather than boost, so expect a smaller but still noticeable change in response.
This car is listed with a Valeo VD46 engine control unit. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Citroen C3 1.2 PureTech 67bhp?
We expect 77bhp and 118Nm against 67bhp and 106Nm as standard: up to +10bhp and +12Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Citroen C3 1.2 PureTech 67bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 75bhp and 117Nm expected. The Eco map is economy first: 74bhp and 116Nm. Both still sit above the standard 67bhp and 106Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Citroen C3 figures
Other petrol variants
All petrol C3 (GEN 3) variants · C3 (GEN 3) 2016> overview · All Citroen figures