Chevrolet Spark 2013> 1.2i LTZ 79bhp remap figures
Thinking of remapping a Chevrolet Spark 1.2i LTZ 79bhp? The standard car makes 79bhp and 111Nm; with a Stage 1 remap from our Leicester workshop we expect around 91bhp and 124Nm, up to +12bhp and +13Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 79 bhp | 91 bhp | +12 bhp |
| Torque | 111 Nm | 124 Nm | +13 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 79 bhp | 111 Nm | |
| Stage 1Maximum software-only performance | 91 bhp | 124 Nm | +12 bhp +13 Nm |
| Stage 1 EcoPerformance with economy in mind | 88 bhp | 123 Nm | +9 bhp +12 Nm |
| Eco mapEconomy first | 87 bhp | 122 Nm | +8 bhp +11 Nm |
Who is the Stage 1 map for?
- Drivers who want a sharper throttle and a small, honest gain from software alone.
- Owners who would rather keep the car standard in every other way.
- Anyone who wants the fullest software-only map for this engine, accepting that the gain is modest without a turbocharger.
What this means for your Spark
Without a turbocharger the improvement comes from ignition, fuelling and throttle mapping rather than boost, so expect a smaller but still noticeable change in response.
Engine management is by a Delco E78 unit. We read the ECU on your car and compare it with the software listed here before any work starts, so you know what to expect before you commit.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Chevrolet Spark 1.2i LTZ 79bhp?
We expect 91bhp and 124Nm against 79bhp and 111Nm as standard: up to +12bhp and +13Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Chevrolet Spark 1.2i LTZ 79bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 88bhp and 123Nm expected. The Eco map is economy first: 87bhp and 122Nm. Both still sit above the standard 79bhp and 111Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Chevrolet Spark figures
Other petrol variants
All petrol Spark variants · Spark 2013> overview · All Chevrolet figures