Chevrolet Corvette 2005-2013 6.2 V8 430bhp remap figures
Thinking of remapping a Chevrolet Corvette 6.2 V8 430bhp? The standard car makes 430bhp and 575Nm; with a Stage 1 remap from our Leicester workshop we expect around 465bhp and 622Nm, up to +35bhp and +47Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 430 bhp | 465 bhp | +35 bhp |
| Torque | 575 Nm | 622 Nm | +47 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 430 bhp | 575 Nm | |
| Stage 1Maximum software-only performance | 465 bhp | 622 Nm | +35 bhp +47 Nm |
| Stage 1 EcoPerformance with economy in mind | 456 bhp | 618 Nm | +26 bhp +43 Nm |
| Eco mapEconomy first | 453 bhp | 616 Nm | +23 bhp +41 Nm |
Who is the Stage 1 map for?
- Drivers who want a sharper throttle and a small, honest gain from software alone.
- Owners who would rather keep the car standard in every other way.
- Anyone who wants the fullest software-only map for this engine, accepting that the gain is modest without a turbocharger.
What this means for your Corvette
Without a turbocharger the improvement comes from ignition, fuelling and throttle mapping rather than boost, so expect a smaller but still noticeable change in response.
Engine management is by a Delco E38 unit. Older engine management is simpler to work with, but age matters: worn sensors, leaks and tired components can hold back what a remap delivers, which is why we run a diagnostic check first.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Chevrolet Corvette 6.2 V8 430bhp?
We expect 465bhp and 622Nm against 430bhp and 575Nm as standard: up to +35bhp and +47Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Chevrolet Corvette 6.2 V8 430bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 456bhp and 618Nm expected. The Eco map is economy first: 453bhp and 616Nm. Both still sit above the standard 430bhp and 575Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Chevrolet Corvette figures
Other petrol variants
All petrol Corvette variants · Corvette 2005-2013 overview · All Chevrolet figures