BMW X6 (G06) 2019> X6 M 616bhp remap figures
The BMW X6 X6 M 616bhp (2019>) is a petrol 4.4L model making 616bhp and 750Nm as standard. After a Stage 1 ECU remap we expect 670bhp and 941Nm - up to 54bhp and 191Nm more than stock.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 616 bhp | 670 bhp | +54 bhp |
| Torque | 750 Nm | 941 Nm | +191 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 616 bhp | 750 Nm | |
| Stage 1Maximum software-only performance | 670 bhp | 941 Nm | +54 bhp +191 Nm |
| Stage 1 EcoPerformance with economy in mind | 657 bhp | 926 Nm | +41 bhp +176 Nm |
| Eco mapEconomy first | 652 bhp | 916 Nm | +36 bhp +166 Nm |
Who is the Stage 1 map for?
- Drivers who want a sharper throttle and a small, honest gain from software alone.
- Owners who would rather keep the car standard in every other way.
- Anyone who wants the fullest software-only map for this engine, accepting that the gain is modest without a turbocharger.
What this means for your X6
Without a turbocharger the improvement comes from ignition, fuelling and throttle mapping rather than boost, so expect a smaller but still noticeable change in response.
This car is listed with a Bosch MG1CS201 engine control unit. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the BMW X6 X6 M 616bhp?
We expect 670bhp and 941Nm against 616bhp and 750Nm as standard: up to +54bhp and +191Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the BMW X6 X6 M 616bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 657bhp and 926Nm expected. The Eco map is economy first: 652bhp and 916Nm. Both still sit above the standard 616bhp and 750Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More BMW X6 figures
Other petrol variants
All petrol X6 (G06) variants · X6 (G06) 2019> overview · All BMW figures