BMW X6 (F16) 2014> xDrive30d 254bhp remap figures
Thinking of remapping a BMW X6 xDrive30d 254bhp? The standard car makes 254bhp and 560Nm; with a Stage 1 remap from our Leicester workshop we expect around 315bhp and 645Nm, up to +61bhp and +85Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 254 bhp | 315 bhp | +61 bhp |
| Torque | 560 Nm | 645 Nm | +85 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 254 bhp | 560 Nm | |
| Stage 1Maximum software-only performance | 315 bhp | 645 Nm | +61 bhp +85 Nm |
| Stage 1 EcoPerformance with economy in mind | 300 bhp | 638 Nm | +46 bhp +78 Nm |
| Eco mapEconomy first | 295 bhp | 634 Nm | +41 bhp +74 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your X6
On a diesel the biggest change is normally torque: the remap changes how much fuel and boost the ECU allows across the rev range, so pulling power arrives earlier and holds on longer.
This car is listed with a Bosch EDC17C50/C56 engine control unit. We read the ECU on your car and compare it with the software listed here before any work starts, so you know what to expect before you commit.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the BMW X6 xDrive30d 254bhp?
We expect 315bhp and 645Nm against 254bhp and 560Nm as standard: up to +61bhp and +85Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the BMW X6 xDrive30d 254bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 300bhp and 638Nm expected. The Eco map is economy first: 295bhp and 634Nm. Both still sit above the standard 254bhp and 560Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More BMW X6 figures
Other diesel variants
All diesel X6 (F16) variants · X6 (F16) 2014-2019 overview · All BMW figures