BMW 3 Series (G20) 2019> M340i 368bhp remap figures
Stock, this 2019> BMW 3 Series petrol (3.0L) produces 368bhp and 500Nm. Our expected figures for a Stage 1 remap are 455bhp and 574Nm, an expected gain of up to 87bhp and 74Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 368 bhp | 455 bhp | +87 bhp |
| Torque | 500 Nm | 574 Nm | +74 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 368 bhp | 500 Nm | |
| Stage 1Maximum software-only performance | 455 bhp | 574 Nm | +87 bhp +74 Nm |
| Stage 1 EcoPerformance with economy in mind | 433 bhp | 568 Nm | +65 bhp +68 Nm |
| Eco mapEconomy first | 426 bhp | 564 Nm | +58 bhp +64 Nm |
Who is the Stage 1 map for?
- Drivers who want a sharper throttle and a small, honest gain from software alone.
- Owners who would rather keep the car standard in every other way.
- Anyone who wants the fullest software-only map for this engine, accepting that the gain is modest without a turbocharger.
What this means for your 3 Series
Without a turbocharger the improvement comes from ignition, fuelling and throttle mapping rather than boost, so expect a smaller but still noticeable change in response.
This car is listed with a Bosch MG1CS201 engine control unit. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the BMW 3 Series M340i 368bhp?
We expect 455bhp and 574Nm against 368bhp and 500Nm as standard: up to +87bhp and +74Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the BMW 3 Series M340i 368bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 433bhp and 568Nm expected. The Eco map is economy first: 426bhp and 564Nm. Both still sit above the standard 368bhp and 500Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.