BMW 3 Series (E9X) 2005-2008 330d 227bhp remap figures
Stock, this 2005-2008 BMW 3 Series diesel (3.0L) produces 227bhp and 500Nm. Our expected figures for a Stage 1 remap are 305bhp and 569Nm, an expected gain of up to 78bhp and 69Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 227 bhp | 305 bhp | +78 bhp |
| Torque | 500 Nm | 569 Nm | +69 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 227 bhp | 500 Nm | |
| Stage 1Maximum software-only performance | 305 bhp | 569 Nm | +78 bhp +69 Nm |
| Stage 1 EcoPerformance with economy in mind | 286 bhp | 563 Nm | +59 bhp +63 Nm |
| Eco mapEconomy first | 279 bhp | 560 Nm | +52 bhp +60 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your 3 Series
On a diesel the biggest change is normally torque: the remap changes how much fuel and boost the ECU allows across the rev range, so pulling power arrives earlier and holds on longer.
The ECU recorded for this variant is a Bosch EDC16C35. Older engine management is simpler to work with, but age matters: worn sensors, leaks and tired components can hold back what a remap delivers, which is why we run a diagnostic check first.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the BMW 3 Series 330d 227bhp?
We expect 305bhp and 569Nm against 227bhp and 500Nm as standard: up to +78bhp and +69Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the BMW 3 Series 330d 227bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 286bhp and 563Nm expected. The Eco map is economy first: 279bhp and 560Nm. Both still sit above the standard 227bhp and 500Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More BMW 3 Series figures
Other diesel variants
- 330d 241bhp 2009-2011
- 325d 201bhp 2010-2011
- Alpina D3 197bhp 2005-2008
- 325d 194bhp 2005-2009
- 320d ED 181bhp 2010-2011
- 320d 174bhp 2007-2009
- 335d 286bhp 2005-2011
- 320d 163bhp 2005-2006
- 320d ED 160bhp 2010-2011
- 320d 150bhp 2005-2011
All diesel 3 Series (E9X) variants · 3 Series (E9X) 2005-2011 overview · All BMW figures