BMW 2 Series (M) (G87) 2024> M2 473bhp remap figures
The BMW 2 Series (M) M2 473bhp (2024>) is a petrol 3.0L model making 473bhp and 601Nm as standard. After a Stage 1 ECU remap we expect 653bhp and 852Nm - up to 180bhp and 251Nm more than stock.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 473 bhp | 653 bhp | +180 bhp |
| Torque | 601 Nm | 852 Nm | +251 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 473 bhp | 601 Nm | |
| Stage 1Maximum software-only performance | 653 bhp | 852 Nm | +180 bhp +251 Nm |
| Stage 1 EcoPerformance with economy in mind | 608 bhp | 832 Nm | +135 bhp +231 Nm |
| Eco mapEconomy first | 594 bhp | 819 Nm | +121 bhp +218 Nm |
Who is the Stage 1 map for?
- Drivers who want a sharper throttle and a small, honest gain from software alone.
- Owners who would rather keep the car standard in every other way.
- Anyone who wants the fullest software-only map for this engine, accepting that the gain is modest without a turbocharger.
What this means for your 2 Series (M)
Without a turbocharger the improvement comes from ignition, fuelling and throttle mapping rather than boost, so expect a smaller but still noticeable change in response.
The ECU recorded for this variant is a Bosch MG1CS049. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the BMW 2 Series (M) M2 473bhp?
We expect 653bhp and 852Nm against 473bhp and 601Nm as standard: up to +180bhp and +251Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the BMW 2 Series (M) M2 473bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 608bhp and 832Nm expected. The Eco map is economy first: 594bhp and 819Nm. Both still sit above the standard 473bhp and 601Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More BMW 2 Series (M) figures
Other petrol variants
All petrol 2 Series (M) (G87) variants · 2 Series (M) (G87) 2023> overview · All BMW figures