BMW 2 Series Active Tourer 2022> 230e 326bhp remap figures
The BMW 2 Series Active Tourer 230e 326bhp (2022>) is a petrol 1.5L model making 326bhp and 477Nm as standard. After a Stage 1 ECU remap we expect 365bhp and 520Nm - up to 39bhp and 43Nm more than stock.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 326 bhp | 365 bhp | +39 bhp |
| Torque | 477 Nm | 520 Nm | +43 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 326 bhp | 477 Nm | |
| Stage 1Maximum software-only performance | 365 bhp | 520 Nm | +39 bhp +43 Nm |
| Stage 1 EcoPerformance with economy in mind | 355 bhp | 517 Nm | +29 bhp +40 Nm |
| Eco mapEconomy first | 352 bhp | 514 Nm | +26 bhp +37 Nm |
Who is the Stage 1 map for?
- Drivers who want a sharper throttle and a small, honest gain from software alone.
- Owners who would rather keep the car standard in every other way.
- Anyone who wants the fullest software-only map for this engine, accepting that the gain is modest without a turbocharger.
What this means for your 2 Series Active Tourer
Naturally aspirated petrol engines have no boost to raise, so gains from software alone are more modest than on a turbocharged car and come from fuelling, ignition and throttle response.
This car is listed with a Bosch MG1CS201 engine control unit. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the BMW 2 Series Active Tourer 230e 326bhp?
We expect 365bhp and 520Nm against 326bhp and 477Nm as standard: up to +39bhp and +43Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the BMW 2 Series Active Tourer 230e 326bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 355bhp and 517Nm expected. The Eco map is economy first: 352bhp and 514Nm. Both still sit above the standard 326bhp and 477Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More BMW 2 Series Active Tourer figures
Other petrol variants
All petrol 2 Series Active Tourer variants · 2 Series Active Tourer 2022> overview · All BMW figures