Alpine A110 S 2018> 1.8 Turbo 286bhp Stage 1 Eco remap figures
The Stage 1 Eco map for the Alpine A110 S 1.8 Turbo 286bhp (2018>): 315bhp and 405Nm expected from a standard 286bhp and 320Nm, up to +29bhp and +85Nm. It keeps most of the Stage 1 gain (Stage 1 is 325bhp and 412Nm) and is tuned with economy in mind: the choice if you want the performance and care what each tank costs.
Choose your map
Stage 1 Eco remap figures
Stage 1 Eco is performance with economy in mind. It keeps most of the Stage 1 gain, so the car still pulls well, but the map is shaped for efficient, relaxed driving rather than flat-out output. It is above the standard figures. We don't quote mpg, because economy depends on the car and how it is driven.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 286 bhp | 315 bhp | +29 bhp |
| Torque | 320 Nm | 405 Nm | +85 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 286 bhp | 320 Nm | |
| Stage 1Maximum software-only performance | 325 bhp | 412 Nm | +39 bhp +92 Nm |
| Stage 1 EcoPerformance with economy in mind | 315 bhp | 405 Nm | +29 bhp +85 Nm |
| Eco mapEconomy first | 312 bhp | 400 Nm | +26 bhp +80 Nm |
Who is the Stage 1 Eco map for?
- Drivers who want a quicker, more responsive car, tuned with economy in mind.
- Daily drivers who want strong mid-range pull without giving up efficiency.
- Anyone who would otherwise take full Stage 1 but cares what each tank costs.
How Stage 1 Eco compares with Stage 1
Full Stage 1 on this Alpine A110 S is expected to give 325bhp and 412Nm (+39bhp, +92Nm). The Stage 1 Eco keeps about 74% of that power gain and 92% of the torque gain, so you get 315bhp and 405Nm: 10bhp less and 7Nm less than Stage 1, with the map shaped for efficient, relaxed driving, so it suits you if you want the pull and care about running costs. Both sit above the standard 286bhp and 320Nm.
What this means for your A110 S
Turbocharged petrol engines respond well to calibration changes: boost and timing are the main levers, and the result is a flatter, stronger torque curve as well as a higher peak.
Engine management is by a Hitachi BED501 unit. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 Eco questions
How much power does the Stage 1 Eco map give the Alpine A110 S 1.8 Turbo 286bhp?
We expect 315bhp and 405Nm against 286bhp and 320Nm as standard: up to +29bhp and +85Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
How does Stage 1 Eco differ from Stage 1 on this engine?
Full Stage 1 is expected to give 325bhp and 412Nm. Stage 1 Eco gives 10bhp less and 7Nm less, in exchange for a map shaped with economy in mind. It still sits above the standard figures.
Is Stage 1 Eco or the Eco map better for me?
Choose Stage 1 Eco if you want the performance (315bhp and 405Nm) and still care about running costs. Choose the Eco map (312bhp and 400Nm) if economy matters more than pace.
Will the Stage 1 Eco map save fuel?
It is tuned with economy in mind while keeping most of the Stage 1 performance. We do not quote mpg figures, because economy depends on the car, its condition and how it is driven.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Alpine A110 S figures
Other petrol variants
All petrol A110 S variants · A110 S 2018> overview · All Alpine figures