Alpine A110 2018> 1.8 Turbo 248bhp remap figures
Thinking of remapping a Alpine A110 1.8 Turbo 248bhp? The standard car makes 248bhp and 320Nm; with a Stage 1 remap from our Leicester workshop we expect around 295bhp and 412Nm, up to +47bhp and +92Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 248 bhp | 295 bhp | +47 bhp |
| Torque | 320 Nm | 412 Nm | +92 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 248 bhp | 320 Nm | |
| Stage 1Maximum software-only performance | 295 bhp | 412 Nm | +47 bhp +92 Nm |
| Stage 1 EcoPerformance with economy in mind | 283 bhp | 405 Nm | +35 bhp +85 Nm |
| Eco mapEconomy first | 279 bhp | 400 Nm | +31 bhp +80 Nm |
Who is the Stage 1 map for?
- Drivers who want a noticeably quicker car from a software-only change, with no new parts.
- Daily drivers who want stronger mid-range pull and a sharper throttle.
- Anyone who wants the biggest gain we list without fitting hardware.
What this means for your A110
Turbocharged petrol engines respond well to calibration changes: boost and timing are the main levers, and the result is a flatter, stronger torque curve as well as a higher peak.
This car is listed with a Hitachi BED501 engine control unit. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Alpine A110 1.8 Turbo 248bhp?
We expect 295bhp and 412Nm against 248bhp and 320Nm as standard: up to +47bhp and +92Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Alpine A110 1.8 Turbo 248bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 283bhp and 405Nm expected. The Eco map is economy first: 279bhp and 400Nm. Both still sit above the standard 248bhp and 320Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Alpine A110 figures
Other petrol variants
All petrol A110 variants · A110 2018> overview · All Alpine figures