Alfa Romeo Mito 2014> 1.4 TB MultiAir 138bhp remap figures
Thinking of remapping a Alfa Romeo Mito 1.4 TB MultiAir 138bhp? The standard car makes 138bhp and 231Nm; with a Stage 1 remap from our Leicester workshop we expect around 180bhp and 290Nm, up to +42bhp and +59Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 138 bhp | 180 bhp | +42 bhp |
| Torque | 231 Nm | 290 Nm | +59 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 138 bhp | 231 Nm | |
| Stage 1Maximum software-only performance | 180 bhp | 290 Nm | +42 bhp +59 Nm |
| Stage 1 EcoPerformance with economy in mind | 170 bhp | 285 Nm | +32 bhp +54 Nm |
| Eco mapEconomy first | 166 bhp | 282 Nm | +28 bhp +51 Nm |
Who is the Stage 1 map for?
- Drivers who want a sharper throttle and a small, honest gain from software alone.
- Owners who would rather keep the car standard in every other way.
- Anyone who wants the fullest software-only map for this engine, accepting that the gain is modest without a turbocharger.
What this means for your Mito
Without a turbocharger the improvement comes from ignition, fuelling and throttle mapping rather than boost, so expect a smaller but still noticeable change in response.
This car is listed with a Marelli 8GM engine control unit. We read the ECU on your car and compare it with the software listed here before any work starts, so you know what to expect before you commit.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Alfa Romeo Mito 1.4 TB MultiAir 138bhp?
We expect 180bhp and 290Nm against 138bhp and 231Nm as standard: up to +42bhp and +59Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Alfa Romeo Mito 1.4 TB MultiAir 138bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 170bhp and 285Nm expected. The Eco map is economy first: 166bhp and 282Nm. Both still sit above the standard 138bhp and 231Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Alfa Romeo Mito figures
Other petrol variants
- 1.4 TB MultiAir 135bhp 2009>
- 1.4 TB 155bhp 2009>
- 1.4 TB 120bhp 2009>
- 1.4 TB MultiAir 170bhp 2009>
- 1.4 MultiAir 105bhp 2009>
- 0.9 TB TwinAir 103bhp 2014>
- 1.4 16v 95bhp 2009>
- 0.9 TB TwinAir 85bhp 2009>
- 1.4 8v 78bhp 2009>
All petrol Mito variants · Mito 2009> overview · All Alfa Romeo figures