Alfa Romeo Mito 2009> 1.6 JTDM 120bhp remap figures
Thinking of remapping a Alfa Romeo Mito 1.6 JTDM 120bhp? The standard car makes 120bhp and 320Nm; with a Stage 1 remap from our Leicester workshop we expect around 155bhp and 404Nm, up to +35bhp and +84Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 120 bhp | 155 bhp | +35 bhp |
| Torque | 320 Nm | 404 Nm | +84 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 120 bhp | 320 Nm | |
| Stage 1Maximum software-only performance | 155 bhp | 404 Nm | +35 bhp +84 Nm |
| Stage 1 EcoPerformance with economy in mind | 146 bhp | 397 Nm | +26 bhp +77 Nm |
| Eco mapEconomy first | 143 bhp | 393 Nm | +23 bhp +73 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your Mito
On a diesel the biggest change is normally torque: the remap changes how much fuel and boost the ECU allows across the rev range, so pulling power arrives earlier and holds on longer.
Engine management is by a Bosch EDC16C39 unit. We read the ECU on your car and compare it with the software listed here before any work starts, so you know what to expect before you commit.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Alfa Romeo Mito 1.6 JTDM 120bhp?
We expect 155bhp and 404Nm against 120bhp and 320Nm as standard: up to +35bhp and +84Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Alfa Romeo Mito 1.6 JTDM 120bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 146bhp and 397Nm expected. The Eco map is economy first: 143bhp and 393Nm. Both still sit above the standard 120bhp and 320Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Alfa Romeo Mito figures
Other diesel variants
All diesel Mito variants · Mito 2009> overview · All Alfa Romeo figures