Alfa Romeo Brera 2006-2010 3.2 V6 JTS 260bhp remap figures
The Alfa Romeo Brera 3.2 V6 JTS 260bhp (2006-2010) is a petrol 3.2L model making 260bhp and 323Nm as standard. After a Stage 1 ECU remap we expect 285bhp and 355Nm - up to 25bhp and 32Nm more than stock.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 260 bhp | 285 bhp | +25 bhp |
| Torque | 323 Nm | 355 Nm | +32 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 260 bhp | 323 Nm | |
| Stage 1Maximum software-only performance | 285 bhp | 355 Nm | +25 bhp +32 Nm |
| Stage 1 EcoPerformance with economy in mind | 279 bhp | 352 Nm | +19 bhp +29 Nm |
| Eco mapEconomy first | 277 bhp | 351 Nm | +17 bhp +28 Nm |
Who is the Stage 1 map for?
- Drivers who want a sharper throttle and a small, honest gain from software alone.
- Owners who would rather keep the car standard in every other way.
- Anyone who wants the fullest software-only map for this engine, accepting that the gain is modest without a turbocharger.
What this means for your Brera
Naturally aspirated petrol engines have no boost to raise, so gains from software alone are more modest than on a turbocharged car and come from fuelling, ignition and throttle response.
Engine management is by a Bosch MED7.6.2 unit. We read the ECU on your car and compare it with the software listed here before any work starts, so you know what to expect before you commit.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Alfa Romeo Brera 3.2 V6 JTS 260bhp?
We expect 285bhp and 355Nm against 260bhp and 323Nm as standard: up to +25bhp and +32Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Alfa Romeo Brera 3.2 V6 JTS 260bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 279bhp and 352Nm expected. The Eco map is economy first: 277bhp and 351Nm. Both still sit above the standard 260bhp and 323Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Alfa Romeo Brera figures
Other petrol variants
All petrol Brera variants · Brera 2006-2010 overview · All Alfa Romeo figures