Alfa Romeo 156 1997-2005 2.4 JTD 140bhp remap figures
Thinking of remapping a Alfa Romeo 156 2.4 JTD 140bhp? The standard car makes 140bhp and 304Nm; with a Stage 1 remap from our Leicester workshop we expect around 206bhp and 406Nm, up to +66bhp and +102Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 140 bhp | 206 bhp | +66 bhp |
| Torque | 304 Nm | 406 Nm | +102 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 140 bhp | 304 Nm | |
| Stage 1Maximum software-only performance | 206 bhp | 406 Nm | +66 bhp +102 Nm |
| Stage 1 EcoPerformance with economy in mind | 190 bhp | 398 Nm | +50 bhp +94 Nm |
| Eco mapEconomy first | 184 bhp | 393 Nm | +44 bhp +89 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your 156
Diesel remaps work mainly on boost pressure, fuel delivery and torque limiters, which is why the Nm gain is usually the figure you feel in everyday driving, particularly when overtaking or towing.
This car is listed with a Bosch EDC15C7 engine control unit. Older engine management is simpler to work with, but age matters: worn sensors, leaks and tired components can hold back what a remap delivers, which is why we run a diagnostic check first.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Alfa Romeo 156 2.4 JTD 140bhp?
We expect 206bhp and 406Nm against 140bhp and 304Nm as standard: up to +66bhp and +102Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Alfa Romeo 156 2.4 JTD 140bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 190bhp and 398Nm expected. The Eco map is economy first: 184bhp and 393Nm. Both still sit above the standard 140bhp and 304Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.